TOCADERO EVO TOC ANALYZER
TOCADERO EVO TOC ANALYZER – Specifications
| Specification | Details |
|---|---|
| METHODS & DETECTION | Continuous flow with UV oxidation and conductivity detection |
| ENVIRONMENTAL CONDITIONS | Relative humidity: < 80 % non condensingTemperature: 10 - 40 °C |
| CYCLE TIME | 1 sec. (online method)1 min. + 1 min. rinsing (offline method) |
| DIMENSIONS / WEIGHT / POWER | 338 W x 200 D x 450 H mm, 11 kg,110 - 230 VAC ± 10 %, 47 - 63 Hz, 60 Watt |
| SAMPLE FLOW | approx. 14 ml/min |
| SAMPLE TYPE | Pure Water (PW) & Ultra Pure Water (UPW),Water for Injection (WFI), Boiler Feed Water |
| MEASUREMENT RANGE | 0 - 1000 ppb TOCApplication-dependent up to 2000 ppb TOC |
| CONDUCTIVITY SAMPLE | < 2 µS/cmApplication-dependent up to < 10 µS/cm |
| ACCURACY & PRECISION | Limit of detection: 0,1 ppbAccuracy:± 0,05 ppb online |
| INPUT PRESSURE | < 0,5 bar |
| CONNECTIONS | 1 x sample, 1 x check1 x sample, 3 x check (optional) |
| SAMPLE TEMPERATURE | < 50 °C |
| NORMALIZATIONS | USP <643>, EP 2.2.44, JP, CPFDA 21 CFR Part 11 - Compliance for Pharma |
| INTERFACES | 2 x analog (0/4 - 20 mA), according NAMUR NE431 x relais (collective error)RJ45 Ethernet, USBOptional: 2 additional analog outputs,2 additional relay outputs,autosampler |
